다운로드
EQ Presets for Ultimate Ears In-ear Monitors
EQ presets for the Ultimate Ears UERM, UE11, UE18, UE4, UE5, UE7, and UE900 in-ear monitors.
바탕화면
셀프 트레이닝
특집 브이로그
오디오 네트워킹
CL / QL 시리즈 온라인 세미나
온라인에서 CL / QL 시리즈 교육 세미나를 경험하십시오!!
Yamaha 디지털 믹싱 콘솔의 가장 숙련 된 트레이너 Leland Green과 Jose Perez가 설명하는 CL/QL 시리즈 온라인 교육 세미나입니다. 내용의 순서대로 모두 듣거나, 필요한 주제에 초점을 맞춘 비디오 파트를 따로 선택하여 들을 수 있습니다.
[Notes:]이 비디오는 CL 시리즈 펌웨어 V2.0 및 QL 시리즈 펌웨어 V1.0을 사용하여 작성되었습니다. 최신 사양은 향후 펌웨어 업데이트에 따라 변경 될 수 있습니다.
* 자막은 영어, 스페인어, 러시아어 (일부), 중국어 및 일본어로 제공됩니다. 언어가 표시되지 않으면 플레이어의 오른쪽 하단에 있는 메뉴 버튼을 클릭하여 선택하십시오.
1. Hardware Overview
2. System Configuration - Basics
3. Console Operation - Basics
4. Console Operation - Advanced
-
CL/QL/TF 시리즈용 QLab 설치 안내서
이 문서는 진정한 표준 공연 제어 시스템인 "QLab"과 CL/QL/TF 시리즈 콘솔을 제어하는 Python 스크립트를 연결 및 설정하는 방법을 설명합니다.
-
CL/QL 시리즈 시스템 디자인 가이드
이 가이드는 CL/QL 시리즈를 사용하는 Dante 시스템의 기본 설정뿐 아니라 여러 콘솔을 사용할 때의 제한 사항 등 시스템을 설계할 때 유용한 조언을 제공합니다.
-
Yamaha CL/QL을 이용한 Shure 무선 설정 가이드
이 문서는 Yamaha CL 및 QL 콘솔을 사용하는 Shure 무선 마이크 수신기의 간단한 설정 절차를 간략히 설명하고 성공적인 시스템 배포 팁을 다룹니다.
-
“KLANG IEM 솔루션을 사용한 CL / QL 시리즈” 설명서
이 문서와 비디오는 Dante 네트워크를 통해 KLANG 3D 이어폰 모니터링 시스템으로 Yamaha CL / QL 시리즈 콘솔을 설정하는 방법을 보여줍니다.
-
“Aviom Personal Mixer를 사용한 CL / QL 시리즈” 설명서
이 설명서는 Aviom Personal Mixer를 Yamaha CL / QL 시리즈 디지털 믹싱 콘솔을 기반으로 한 단테 (Dante) 네트워크에 결합하는 방법을 보여주는 시스템 설치 예를 제공합니다.
-
“CL & QL 외부 서라운드 미터링” 설명서
이 설명서는 외부 서라운드 미터링 장치인 TouchMonitor TM7을 Yamaha CL 또는 QL 디지털 믹싱 콘솔과 연결하기 위한 단계별 솔루션을 제공합니다.
-
“CL 시리즈 Nuendo Live 라이브 녹음” 설명서
이 설명서는 Yamaha CL 시리즈 디지털 믹서와 Steinberg Nuendo Live의 번들 소프트웨어를 사용하여 고품질의 라이브 멀티 트랙 녹음을 쉽고 빠르게 수행하는 방법을 보여줍니다.
-
FAQ
-
What are the differences between the three models CL5, CL3 and CL1?
-
How many Rio units can a CL console control?
-
Can different types of I/O racks be mixed in a system?
-
How many consoles can share HA with Gain Compensation?
-
What are the CL series Gain Compensation algorithm and the benefit?
-
Is Cascade function available in order to increase Input channel mixing capacity?
-
When cascading two CL/QL Series consoles, how can I connect them and make the word clock settings?
-
What is Premium Rack? What is VCM technology?
-
Why do the headamp gain values differ from those of the other consoles such as M7CL and PM5D?
-
Do I have to use a computer to setup routing between console and I/O racks?
-
Do I have to use network switches in order to connect console and I/O racks?
-
Can systems be expanded not only with consoles and I/O racks, but also with signal processors or power amps?
-
How is redundancy in terms of power supply, network and DSP processing?
-
What do I have to take care of when connecting multiple CL consoles in a system?
-
How can I load a console file from a guest engineer on my CL console without affecting the Dante setup and I/O rack patches?
-
How can I load only some specific scenes from a console file?
-
Is a console Editor application available for CL series?
-
Is StageMix available for CL series?
-
How many StageMix can be used simultaneously?
-
Can StageMix be used with CL Editor simultaneously?
-
Can I use CL Editor offline to set up the routing between the CL and I/O racks beforehand?
-
Which models of Shure wireless receivers are supported for the control and monitor from the CL/QL series console?
-
Which parameters of Shure wireless receiver can be controlled or monitored from the CL/QL series?
-
How many units of Shure wireless receivers can be controlled/monitored from the CL/QL series?
-
Can the Shure remote control run on the Dante redundant network?
-
I cannot control Shure wireless receivers from CL/QL series although they are properly wired. What should be checked?
-
What sort of Live Recording solution is available with CL?
-
What is Nuendo Live?
-
What is Dante Virtual Soundcard (DVS)?
-
Is a DVS license included with CL consoles?
-
I could not activate my DVS though I've entered the included serial number. How should I do that?
-
Can I buy DVS as a standalone product?
-
Can I use multiple computers for multi-track recording at a time?
-
Can I perform multi-track recording on a desktop PC with Dante Accelerator PCIe card attached instead of DVS?
-
Is 2TR recording file path compatible with LS9?
-
Is console data compatible between three models CL5, CL3 and CL1?
-
Can I convert CL series console data to other mixing consoles?
-
Can I use external power supply PW800W which is using for PM5D and M7CL?
-
Do the Rio units work with existing consoles (e.g. PM5D, M7CL) using Dante-MY16-AUD?
-
Can I increase the number of mixing channels if Dante-MY16-AUD cards are inserted into the slots?
-
Can I use the Gain Compensation function when the CL series are used in conjunction with the existing consoles (e.g. PM5D, M7CL)?
-
Is Gain Compensation available for a system which consists of only existing consoles and Rio (i.e. no CL console)?
-
Are our existing Stage-boxes compatible with CL?
