DM2000VCM Digital Production Console

DM2000VCM
믹싱 기능 믹싱 채널 96
GROUP 8
AUX 12
MAIN Stereo
MATRIX 4 Stereo
입력 채널 기능 Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan
출력 채널 기능 Attenuator, 4-band PEQ, Compressor, Delay
내장 프로세서 8x SPX multi effectors, 6x 31-band GEQs
I/O 마이크 입력 24
가상 전원 +48V DC; ON/OFF per channel
라인 입력 2x 2tr in
AD 컨버터 24-bit; 128-time over sampling
라인 출력 Stereo output, Studio monitor output, 2x C-R monitor output, 8x Omni output
DA 컨버터 24-bit; 128-time over sampling
디지털 I/O 3x 2tr in/out, Cascade I/O
확장 슬롯 6x Mini-YGDAI (16-in/16-out)
컨트롤 및 기타 To Host(USB/Serial), Control(GPI), Remote, MIDI, Time code in (SMPTE/MTC), Keyboard, Word clock in, 2x Word clock out, Smart media slot, 2x Lamp on MB2000 optional meter bridge
내부 처리 32bit, Accumulator: 58bit
샘플링 레이트 내부 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
샘플링 주파수 속도 외부 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
신호 지연 Less than 2.3ms (@48kHz), Less than 1.2ms (@96kHz)
총 고조파 왜곡 Less than 0.05% (20Hz-40kHz)
주파수 응답 0, +0.5, -1.5dB 20Hz-40kHz
동적 범위 DA: 110dB; AD+DA: 108dB
전기 및 유도 잡음 수준 상응하는 입력 잡음 -128dBu
잉여 입력 잡음 -94dBu
크로스 토크 -80dB
전원 요구 사항 AC100V, 120V, 220-240V 50/60 Hz
전력 사용량 300W
면적 W 906mm; 35-11/16in
H 257mm; 10-1/8in
D 821mm; 32-5/16in
순 무게 43kg; 94.8lbs
액세서리 Owner’s Manual, Studio Manager Installation Guide, AC power cord

Analog input characteristics

Input terminal PAD GAIN Actual load impedance For use with nominal Input level Connector
Sensitivity Nominal Max. before clip
CH INPUT
A/B 1-24
0 -60dB 3kohms 50-600ohm Mics & 600ohm Lines -70dB -60dB -46dB A:XLR3-31 type(Balanced)
B:TRS Phone jack (Balanced)
-16dB -26dB -16dB -2dB
26 0dB +10dB +24dB
INSERT IN 1-24 10kohms 600ohm Lines -6dB +4dB +18dB TRS Phone jack(Balanced)
2TR IN ANALOG1(L,R) 10kohms 600ohm Lines +4dB +4dB +18dB TRS Phone jack (Balanced)
2TR IN ANALOG2(L,R) 10kohms 600ohm Lines -10dBV -10dBV +4dBV RCA pin jack (Unbalanced)

In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
In these specifications, when dBV represents a specific voltage, 0 dBV is referenced to 1.00 Vrms.

Analog output characteristics

Output terminal Actual source impedance For use with nominal GAIN SW Output level Connector
Nominal Max. before clip
STEREO OUT(L,R) 600ohms 10kohm Lines - -10dBV +4dBV RCA pin jack
(Unbalanced)
75ohms 600ohm Lines - +4dB +18dB XLR3-32 type
(Balanced)
STUDIO MONITOR OUT(L,R) 150ohms 10kohm Lines - +4dB +18dB TRS Phone jack (Balanced)
C-R MONITOR OUT LARGE(L,R) 75ohms 600ohm Lines - +4dB +18dB XLR3-32 type (Balanced)
C-R MONITOR OUT SMALL(L,R) 75ohms 600ohm Lines - +4dB +18dB XLR3-32 type (Balanced)
OMNI OUT 1-8 150ohms 10kohm Lines +18dB
(default)
+4dB +18dB TRS Phone jack (Balanced)
+4dB -10dB +4dB
INSERT OUT 1-24 600ohms 10kohm Lines - +4dB +18dB TRS Phone jack (Balanced)
PHONES 100ohms 8ohm Lines - 4mW 25mW ST Phone jack (Unbalanced)
40ohm Lines - 12mW 75mW

In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
In these specifications, when dBV represents a specific voltage, 0 dBV is referenced to 1.00 Vrms.

Digital input characteristics

Terminal Format Data length Level Connector
2TR IN DIGITAL 1 AES/EBU 24bit RS422 XLR3-31 type(Balanced)
2 AES/EBU 24bit RS422 XLR3-31 type(Balanced)
3 IEC-60958 24bit 0.5Vpp/75ohms RCA pin jack
CASCADE IN - - RS422 D-sub Half Pitch Connector 68P (female)

Digital output characteristics

Terminal Format Data length Level Connector
2TR OUT DIGITAL 1 AES/EBU
(Professional use)
24bit RS422 XLR3-32 type (Balanced)
2 AES/EBU
(Professional use)
24bit RS422 XLR3-32 type (Balanced)
3 IEC-60958
(Consumer Use)
24bit 0.5Vpp/75ohms RCA pin jack
CASCADE OUT - - RS422 D-sub Half Pitch Connector 68P (female)