MGP Series

MGP32X MGP24X MGP16X MGP12X
Mixing capability Mixing channels 32 Line Inputs (24 mono and 4 stereo) 24 Line Inputs (16 mono and 4 stereo) 16 Line Inputs (8 mono and 4 stereo) 12 Line Inputs (4 mono and 4 stereo)
Input channel functions - - Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
믹싱 기능 GROUP 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus
AUX 6 AUX Sends + 2 FX Sends 6 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends
MATRIX 1 Matrix out 1 Matrix out - -
내장 프로세서 FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
I/O 마이크 입력 MIC: 24 (INPUTS HPF: 100Hz 12dB/oct) MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) MIC: 10 MIC:6 (100Hz 12dB/oct)
가상 전원 48V phantom power per channel 48V phantom power per channel 48V phantom power per channel 48V phantom power per channel
라인 입력 LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
디지털 I/O USB Device, iPod / iPhone USB Device, iPod / iPhone USB Audio USB IN: iPod, iPhone exclusive USB Audio USB IN: iPod, iPhone exclusive
Total harmonic distortion 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu)
Frequency response +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Crosstalk -74dB @ 1kHz -74dB @ 1kHz -74dB @ 1kHz -74dB @ 1kHz
Power requirements 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz
Power consumption 86W max 86W max 55W max 45W max
Dimensions W 1,027mm (40.4") 819mm (32.2") 447mm 348mm
H 169mm (6.7") 169mm (6.7") 143mm 143mm
D 565mm (22.2") 565mm (22.2") 495mm 495mm
Net weight 19kg (41.9lb) 15.5kg (34.2lb) 9.0kg 7.5kg
전기 및 유도 잡음 수준 상응하는 입력 잡음 -128 dBu Equivalent Input Noise -128 dBu Equivalent Input Noise -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
잉여 입력 잡음 -94 dBu Residual Output Noise -94 dBu Residual Output Noise -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)

Analog Input Specifications

Input Terminal Actual Source Impedance For Use With Nominal Input Level Connector
  PAD GAIN Sensitivity *1 Nominal Max. before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16
0 -60dB 3kΩ 50-600Ω Mics -80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31 type *2
Phone jack *4
-16dB -36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
26dB -34dB 600Ω Lines -54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack *3
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24
-34dB 10kΩ 600Ω Lines -54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack *4
RCA Pin Jack
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16
10kΩ 600Ω Lines -20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack *5
ST CH INSERT INPUT L,R 10kΩ 600Ω Lines -20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack *5
TALKBACK INPUT 10kΩ 50-600Ω Mics -66 dBu
(0.389 mV)
-50 dBu
(2.45 mV)
-30 dBu
(24.5 mV)
XLR-3-31 type *6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog Output Specifications

Output Terminal Actual Source Impedance For Use With Nominal Output Level Connector
Nominal Max. before clip
ST OUT [L,R] 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
Phone jack *4
MONO OUT 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
GROUP OUT (1-4) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
AUX SEND (1-6) 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type *1
MATRIX OUT (1, 2) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16
75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack *3
ST CH INSERT OUT [L,R] 75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack *3
MONITOR OUT [L,R] 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack *2
PHONES OUT 150Ω 40Ω Phones 3mW 75mW ST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)