DME Satellite Digital Mixing Engine Satellite 단종

DME8i-C DME8o-C DME4io-C DME8i-ES DME8o-ES DME4io-ES
I/O 마이크 입력 8 (Remote HA) - 4 (Remote HA) 8 (Remote HA) - 4 (Remote HA)
AD 컨버터 24-bit; 128-time over sampling - 24-bit; 128-time over sampling 24-bit; 128-time over sampling - 24-bit; 128-time over sampling
라인 출력 - 8 4 - 8 4
DA 컨버터 - 24-bit; 128-time over sampling 24-bit; 128-time over sampling - 24-bit; 128-time over sampling 24-bit; 128-time over sampling
I/O Phantom power +48V DC; ON/OFF: per channel - +48V DC; ON/OFF: per channel +48V DC; ON/OFF: per channel - +48V DC; ON/OFF: per channel
Digital I/O CobraNet (16-in/16-out) CobraNet (16-in/16-out) CobraNet (16-in/16-out) EtherSound (16-in/16-out) EtherSound (16-in/16-out) EtherSound (16-in/16-out)
Internal processing 32bit 32bit 32bit 32bit 32bit 32bit
Sampling frequency rate External 48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer) 48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer) 48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer) 44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%) 44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%) 44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)
Internal - - - 48kHz (±50ppm), 96kHz (±50ppm) 48kHz (±50ppm), 96kHz (±50ppm) 48kHz (±50ppm), 96kHz (±50ppm)
Total harmonic distortion Less than 0.05% (20Hz-40kHz) Less than 0.05% (20Hz-40kHz) Less than 0.05% (20Hz-40kHz) Less than 0.05% (20Hz-40kHz) Less than 0.05% (20Hz-40kHz) Less than 0.05% (20Hz-40kHz)
Frequency response 0, +0.5, -1.5dB 20Hz-40kHz 0, +0.5, -1.5dB 20Hz-40kHz 0, +0.5, -1.5dB 20Hz-40kHz 0, +0.5, -1.5dB 20Hz-40kHz 0, +0.5, -1.5dB 20Hz-40kHz 0, +0.5, -1.5dB 20Hz-40kHz
Dynamic range DA: 106dB; AD+DA: 106dB DA: 106dB; AD+DA: 106dB DA: 106dB; AD+DA: 106dB DA: 106dB; AD+DA: 106dB DA: 106dB; AD+DA: 106dB DA: 106dB; AD+DA: 106dB
Hum & noise level Equivalent input noise -128dBu -128dBu -128dBu -128dBu -128dBu -128dBu
Residual output noise -82dBu -82dBu -82dBu -82dBu -82dBu -82dBu
Crosstalk -80 dB -80 dB -80 dB -80 dB -80 dB -80 dB
Power requirements AC100-240V 50/60Hz AC100-240V 50/60Hz AC100-240V 50/60Hz AC100-240V 50/60Hz AC100-240V 50/60Hz AC100-240V 50/60Hz
Power consumption 40W 40W 40W 40W 40W 40W
Dimensions W 480mm; 18-7/8in 480mm; 18-7/8in 480mm; 18-7/8in 480mm; 18-7/8in 480mm; 18-7/8in 480mm; 18-7/8in
H 44mm; 1-3/4in (1U) 44mm; 1-3/4in (1U) 44mm; 1-3/4in (1U) 44mm; 1-3/4in (1U) 44mm; 1-3/4in (1U) 44mm; 1-3/4in (1U)
D 361mm; 14-1/4in 361mm; 14-1/4in 361mm; 14-1/4in 361mm; 14-1/4in 361mm; 14-1/4in 361mm; 14-1/4in
Net weight 4.4kg; 9.7lbs 4.4kg; 9.7lbs 4.4kg; 9.7lbs 4.5kg; 9.9lbs 4.5kg; 9.9lbs 4.5kg; 9.9lbs
Accessories Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot Owner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot

Input characteristics

Input terminal Gain Actual load impedance For use with nominal Input terminal Connector
Nominal Max. before clip
CH INPUT 1-8 -60dB 3kohms 50-600 ohm Mics * & 600ohm Lines -60dBu -40dBu Euroblock connector
+10dBu +10dBu +30dBu

* Mic inputs can supply +48V phantom power

Output Characteristics

Output terminal Impedance For use with nominal Output level Connector
Nominal Max. before clip
CH OUTPUT 75ohms 600ohm Lines +4dBu +24dBu Euroblock connector

Control I/O Characteristics

Terminal Format Latency Level Connector
CobraNet * CobraNet Fixed: 1.33/2.67/5.33 msec 100Base-TX RJ-45 x2 (Primary/Secondary)
EtherSound ** EtherSound Calculable: 125μsec (SSI OUT to SSI IN) 100Base-TX RJ-45 x2 (In/Out)

* DME8i-C, DME8o-C and DME4io-C
** DME8i-ES, DME8o-ES and DME4io-ES

Terminal Format Level Connector
GPI * IN - 0-5V Euroblock (3.5mm Pitch)
OUT - TTL
+V - 5V
Ethernet IEEE802.3 10Base-T/100Base-TX RJ-45
USB USB1.1 - Type B
REMOTE RS232C/RS422 RS232C/RS422 D-sub 9pin (male)

* 8IN / 4OUT
Inputs: Doesn't apply 2 wire Fader mode
Outputs: Imax/pin = 16mA
Outputs: VH = 2.5V(min.), VL = 0.6V(max.)