MRX7-D

MRX7-D
샘플링 레이트 내부 48kHz/44.1kHz
신호 지연 1.9 msec (AD-DA @48kHz)
총 고조파 왜곡 “0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz)
주파수 응답 20Hz to 20kHz: max:+0.5dB, min:-1.5dB
동적 범위 107dB (typ. Gain:-6dB)
크로스 토크 -100dB (@1kHz)
Heat dissipation 55.9kcal/h max
전원 요구 사항 AC100V-240V 50Hz/60Hz
전력 사용량 65W
면적 W 480mm
H 88mm
D 366mm
순 무게 6.5kg
기타 Memory bank = PRESET: 50, Phantom Power = +48V
액세서리 Included items = Power cord, Euroblock plugs (3-pin, tabbed) x16, Euroblock plugs (16-pin) x2, Cable Ties, Manual

Analog Input Specifications

Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Balanced / Unbalanced
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics -62dBu(0.616mV) -42dBu(6.16mV) Euroblock(5.08mm pitch) Balanced
-6dB 600ΩLines +10dBu(2.45V) +30dBu(24.5V)
ST IN 1,2 - 10kΩ 600Ω Lines -10dBV(316mV) +10dBV(3.16V) RCA Pin Jack Unbalanced

* In these specifications, 0dBu = 0.775 Vrms., 0dBV = 1.00 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to INPUT EUROBLOCK connectors via each individual software controlled switch.

Analog Output Specifications

Output terminal Actual Source impedance For use with nominal Output Level Connector Balanced / Unbalanced
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩLines +4dBu(1.23V) +24dBu(12.3V) Euroblock(5.08mm pitch) Balanced

* In these specifications, 0dBu = 0.775 Vrms.
*All output DA converters are 24bit, 128times oversampling.(Fs=48kHz)

Digital Input and Output Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45
YDIF Out YDIF RS-422 16OUT RJ45
Primary / Secondary Dante 1000BASE-T 64IN/64OUT RJ45

Control I/O Specifications

Terminal Level Connector
GPI 16IN / 8OUT IN 0V-5V (IN 16 L(0V-2.5V) / H(2.5V-24V)) Euroblock
OUT Open Collector
+V DC5V
REMOTE RS-232C (BAUD RATE : 38.4kbps or 115.2kbps) D-sub 9pin (Male)
DCP - RJ-45