다운로드
*Yamaha Steinberg USB 드라이버
Windows: AG 시리즈와 데이터를 올바르게 인식하고 교환할 수 있도록 컴퓨터에 드라이버를 설치해야 합니다.
Mac: 표준 드라이버는 이미 컴퓨터에 설치되어 있어 별도의 드라이버를 설치할 필요가 없습니다.
FAQ
-
I cannot find software such as USB drivers, AG Controller and Cubase AI/WaveLab Cast bundled with AG Mixer/Microphone.
-
Does the AG support the ASIO driver?
-
Is the AG compatible with mobile batteries?
-
What do I need to connect AG Series products with an iPad?
-
What is the different between the AG03MK2 and AG06MK2?
-
What is the LINE switch?
-
What is EQ/COMP?
-
My Windows PC does not detect my console/microphone, and I cannot use the AG Controller. Why?
-
AG DSP Controller cannot find my AG06MK2/AG03MK2/AG01.
-
What kind of signals will be sent to a PC/iPad if the STREAMING OUT switch is set to DRY CH1-2(G)?
-
What kind of signals will be sent to a PC/iPad if the STREAMING OUT switch is set to INPUT MIX?
-
What kind of signals will be sent to a PC/iPad if the STREAMING OUT switch is set to LOOPBACK?
-
What is MIX MINUS? Why can I still see the signal input even though I have turned it off?
-
I cannot adjust the volume of the signal from AUX with the AG knob.
-
What is FOOT SW used for?
-
The power LED on the AG series is unstable.
-
I cannot hear any sound from the microphone connected to CH1.
-
I cannot hear any sound from the headphones.
-
I hear feedback when I connect an AG series product to a PC.
-
There are overlapping signals in the monitor input.
-
There is noise from the microphone.
-
I hear noise from the headphones.
-
How can I adjust effects on the AG series?
-
I cannot hear the sound of a guitar connected to CH2G on the AG03MK2.
-
I cannot hear the sound from a device connected to CH2/3 on AG03MK2.
-
What is the AMP SIM?
