다운로드
EQ Presets for Ultimate Ears In-ear Monitors
EQ presets for the Ultimate Ears UERM, UE11, UE18, UE4, UE5, UE7, and UE900 in-ear monitors.
바탕화면
셀프 트레이닝
특집 브이로그
오디오 네트워킹
CL/QL Series Online Seminar
CL/QL 시리즈 교육 세미나를 온라인으로 경험해 보세요!
야마하 디지털 믹싱 콘솔에 관해 가장 경험이 많은 Leland Green과 Jose Perez가 CL과 QL의 특징과 기능을 설명합니다. 콘텐츠를 순서대로 따라가거나 특정 주제에 초점을 맞춘 특정 동영상을 선택하여 시청할 수 있습니다.
[참고:] CL Series 펌웨어 V2.0 및 QL Series 펌웨어 V1.0을 기준으로 만든 영상입니다. 최신 사양은 향후 펌웨어 업데이트에 따라 변경될 수 있습니다.
* 자막은 영어, 스페인어, 러시아어(일부), 중국어, 일본어로 제공됩니다. 언어가 표시되지 않으면 플레이어 오른쪽 하단의 메뉴 버튼을 클릭하여 선택해주세요.
1. Hardware Overview
2. System Configuration - Basics
3. Console Operation - Basics
4. Console Operation - Advanced
-
CL/QL/TF 시리즈용 QLab 설치 안내서
이 문서는 진정한 표준 공연 제어 시스템인 "QLab"과 CL/QL/TF 시리즈 콘솔을 제어하는 Python 스크립트를 연결 및 설정하는 방법을 설명합니다.
-
CL/QL 시리즈 시스템 디자인 가이드
이 가이드는 CL/QL 시리즈를 사용하는 Dante 시스템의 기본 설정뿐 아니라 여러 콘솔을 사용할 때의 제한 사항 등 시스템을 설계할 때 유용한 조언을 제공합니다.
-
Yamaha CL/QL을 이용한 Shure 무선 설정 가이드
이 문서는 Yamaha CL 및 QL 콘솔을 사용하는 Shure 무선 마이크 수신기의 간단한 설정 절차를 간략히 설명하고 성공적인 시스템 배포 팁을 다룹니다.
-
“KLANG IEM 솔루션을 사용한 CL / QL 시리즈” 설명서
이 문서와 비디오는 Dante 네트워크를 통해 KLANG 3D 이어폰 모니터링 시스템으로 Yamaha CL / QL 시리즈 콘솔을 설정하는 방법을 보여줍니다.
-
QL 시리즈 라이브 녹음 가이드 with Nuendo Live
이 가이드는 Yamaha QL 시리즈 디지털 믹서와 옵션인 Steinberg Nuendo Live의 소프트웨어를 사용하여 고품질의 라이브 멀티트랙 레코딩을 얼마나 빠르고 쉽게 달성할 수 있는지 보여줍니다.
-
“Aviom Personal Mixer를 사용한 CL / QL 시리즈” 설명서
이 설명서는 Aviom Personal Mixer를 Yamaha CL / QL 시리즈 디지털 믹싱 콘솔을 기반으로 한 단테 (Dante) 네트워크에 결합하는 방법을 보여주는 시스템 설치 예를 제공합니다.
-
“CL & QL 외부 서라운드 미터링” 설명서
이 설명서는 외부 서라운드 미터링 장치인 TouchMonitor TM7을 Yamaha CL 또는 QL 디지털 믹싱 콘솔과 연결하기 위한 단계별 솔루션을 제공합니다.
FAQ
-
What are the differences between QL5 and QL1?
-
Can Mix buses be increased to more than 16?
-
How many Dante devices can be mounted? How many R series units can be controlled?
-
How many QL consoles can be used to control R series units in the same Dante network?
-
Can QL and CL series consoles be used in the same system, to control the same R series devices?
-
Can different types of I/O racks be mixed in a system?
-
How many consoles can share HA with Gain Compensation?
-
What are the CL/QL series Gain Compensation algorithm and the benefit?
-
What is the “Port to port” function?
-
What is the use case of “Port to port”?
-
How many channels of built-in Dugan automixing are available?
-
Is Cascade function available in order to increase Input channel mixing capacity?
-
When cascading two CL/QL Series consoles, how can I connect them and make the word clock settings?
-
What is Premium Rack? What is VCM technology?
-
How many GEQ is available?
-
Why do the headamp gain values differ from those of the other consoles such as M7CL and PM5D?
-
Do I have to use a computer to setup routing between console and I/O racks?
-
Do I have to use network switches in order to connect console and I/O racks?
-
Can systems be expanded not only with consoles and I/O racks, but also with signal processors or power amps?
-
How is redundancy in terms of power supply, network and DSP processing?
-
What do I have to take care of when connecting multiple CL/QL consoles in a system?
-
How can I load a console file from a guest engineer on my QL console without affecting the Dante setup and I/O rack patches?
-
Are QL Editor on computer and QL StageMix on iPad available?
-
Can I use QL Editor offline to set up the routing between the QL and I/O racks beforehand?
-
Which models of Shure wireless receivers are supported for the control and monitor from the CL/QL series console?
-
Which parameters of Shure wireless receiver can be controlled or monitored from the CL/QL series?
-
How many units of Shure wireless receivers can be controlled/monitored from the CL/QL series?
-
Can the Shure remote control run on the Dante redundant network?
-
I cannot control Shure wireless receivers from CL/QL series although they are properly wired. What should be checked?
-
What sort of Live Recording solution is available with QL?
-
What is Nuendo Live?
-
What is Dante Virtual Soundcard (DVS)?
-
Is a DVS license included with QL consoles?
-
I could not activate my DVS though I've entered the included serial number. How should I do that?
-
Can I buy DVS as a standalone product?
-
Can I use multiple computers for multi-track recording at a time?
-
Can I perform multi-track recording on a desktop PC with Dante Accelerator PCIe card attached instead of DVS?
-
Is 2-track recording file path compatible with CL series and LS9?
-
Is console data compatible between QL5 and QL1?
-
Do I need to convert CL series console data for use with QL series?
-
Can I convert CL/QL series console data to other mixing consoles?
-
Can I increase the number of mixing channels if Dante-MY16-AUD cards are inserted into the slots?
-
Can I use the Gain Compensation function when the CL/QL series are used in conjunction with the existing consoles (e.g. PM5D, M7CL)?
-
Are our existing Stage-boxes compatible with QL?
