스크롤 가능
| 전체 사양 | LAN 포트 개수(1000BASE-T/100BASE-TX/10BASE-T, etherCON 커넥터) | 10 | 10 | |
|---|---|---|---|---|
| 자동 검색 | Available | Available | ||
| 자동 MDI/MDI-X | Available | Available | ||
| DIP 스위치 | CONFIG, VLAN PRESET | CONFIG, VLAN PRESET | ||
| 전력 공급(AC In 인렛) | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | ||
| 전력 공급(EXT DC INPUT 인렛) | 24VDC±2V, 0.78A, XLR-4-32 type Connector | 24VDC±2V, 0.78A, XLR-4-32 type Connector | ||
| 열 발산 | 18.5 kcal/h | 18.5 kcal/h | ||
| 위험물질 관리 | RoHS compliant | RoHS compliant | ||
| 중량 | 4.5 kg (excluding accessories) | 4.5 kg (excluding accessories) | ||
| General specifications | Number of SFP+ ports (10GBASE-SR, opticalCON DUO connector) | 2 | 0 | |
| Number of SFP+ ports (10GBASE-LR, opticalCON DUO connector) | 0 | 2 | ||
| Console port | 1 (RJ-45) | 1 (RJ-45) | ||
| Indicators | Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2 | Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2 | ||
| Operating temperature | 0 to 40°C | 0 to 40°C | ||
| Storage temperature | -20 to 60°C | -20 to 60°C | ||
| Maximum power consumption | 21W, 0.35A | 21W, 0.35A | ||
| Dimensions | W | 480 mm | 480 mm | |
| H | 44 mm | 44 mm | ||
| D | 362 mm | 362 mm | ||
| Accessories | Power cord, Owner's manual | Power cord, Owner's manual | ||
| Options | PA-700 (AC adaptor) | PA-700 (AC adaptor) | ||
| 일반 사양 | Body material | Metal case, no fan | Metal case, no fan | |
* The LED MODE button allows the PORT indicators to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.
INTERFACE SPECIFICATIONS
*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A
CONNECTOR PIN ASSIGNMENTS
CONSOLE (RS-232C)
* These signals are not used on the SWP2.
